Femtosecond scanning autocorrelator Reef RT AA-10D

Pulse duration range 10-6000 fs  Scanning rate 0.1-20 Hz  Linear distortion <1%  All-reflective optics  Position measurement  Fringe-resolved autocorrelation function  Polarization insensitive  Frictionless movement  Optional fiber output  LabView drivers will be available soon!

Specifications

Wavelength range, nm	700-1300 / 1150-1750*
Pulse duration range, fs	10-6000
Input repetition rate (min)	200 kHz / 100Hz**
Sensitivity	Pav * Ppeak = 10 (mW)2
Input polarization	horizontal or vertical (specify with order)
Scanning rate, Hz	0.1-20
Linear distortion, %	< 1%
Collinear (interferometric)  autocorrelation	yes
Non-collinear (background-free)	no
Cross-correlation (on demand)	no
Necessary equipment	oscilloscope
Signal source and detector	Two-photon conductivity in semiconductor
Dimensions, mm	355 x 250 x 140
	255 x 190 x 85 (electronic unit)

* - model AA-10DR
** - model AA-10DL or AA-10DRL

pdf brochure - buy online

Del Mar Photonics

Femtosecond Autocorrelators Reef-RT (scanning)
and Reef-SS (single-shot)  - Reef-RT - buy online
Avoca SPIDER Spectral Phase Measurement System - manual
Rincon Cross-Correlator Pulse Profiling Systems - TOCC
Rincon SS Single shot third-order cross-correlator
Optimization of Rincon TOAC for customer laser system

 

Femtosecond Real-Time and Single-Shot Autocorrelators

Femtosecond Real-Time Autocorrelators:
Models AA-10, AA-20

  

Specifications:

• Wavelength coverage: 700 - 1000 nm (other wavelengths optionally)
• Interferrometric collinear configuration (noncollinear configuration optionally)
• Scan rate: 10 - 50 Hz
• Pulsewidth range: 20 - 200 fs (AA-20)
  10 - 200 fs (AA-10)
• Low dispersion mirror configuration (AA-10)
• Pulse repetition rate: 1 MHz - 100 MHz
• Minimum peak power: 100 Watts
• Input polarization: linear
• 50 micron thick nonlinear crystal (AA-10)

2 MHz oscilloscope is required

Femtosecond Single-Shot Autocorrelator
Model ASF-20

Specifications:

• Pulsewidth width range: 20 fs - 2 ps
• Wavelength coverage: 500 - 1100 nm
• Input pulse rep. rate range: from single shots to 5 KHz
• Readout: PC data acquisition of autocorrelation function received for selected single pulse
• Required input energy: >10 microJ (20 fs)

  Femtosecond Autocorrelators Reef-RT (scanning)
  and Reef-SS (single-shot)  - Reef-RT - buy online - specs
  Avoca SPIDER Spectral Phase Measurement System - manual
  Rincon Cross-Correlator Pulse Profiling Systems - TOCC
  Rincon SS Single shot third-order cross-correlator
  Optimization of Rincon TOAC for customer laser system

To request additional information E-mail to femto@sciner.com

Del Mar Ventures 4119 Twilight Ridge San Diego, CA 92130 tel: (858) 755-6727 fax: (858) 630-2376 femto@sciner.com

[ Femtosecond Fluorescense Systems ] [ Femtosecond Ti : Sapphire Lasers ] [ Femtosecond Ti : Sapphire Laser Kits ] [ Continuous Wave Ti : Sapphire Laser ] [ Femtosecond Ti : Sapphire Amplifier ] [ Femtosecond Autocorrelators ] [ Wavelength Conversion ] [ Complete Femtosecond Systems ] [ Pulse Picker ]