Del Mar Ventures Start Page> Product List > Femtosecond Products> Complete Femtosecond Laser & Measurement System
Design & Installation of Complete Femtosecond Laser & Measurement Systems.
We use unique approach to design and install complete femtosecond systems, including laser and measurement parts. We can offer various solutions depending on customer experience, possibilities and fields of scientific interest. When ordering complete femtosecond system, customer gets two- year warranty, free personnel training after equipment installation and free test measurements. We even can assist you in receiving of the preliminary scientific results.
TISSA50 femtosecond Ti: sapphire laser and FOG100 femtosecond up-conversion fluorescence system give the easiest and fastest way to perform femtosecond kinetic measurements routinely. We guarantee that you will receive your first femtosecond kinetics within four months after your order.
All solid state wavelength tunable femtosecond laser system is complete system that opens further possibilities in many femtosecond applications. The system is based on the multipass Ti: sapphire amplifier and contains laser, diagnostics, wavelength conversion and measurement parts. Femtosecond fluorescence kinetics can be observed with FOG100 femtosecond up-conversion fluorescence system. Measurement part can be modified for pump -probe measurements, four-photon interaction measurements, light - matter interaction, or for time resolved microscopy including scanning near-field option. The system configuration is shown below.
Ultrafast Dynamics System
Del Mar Photonics offer complete Ultrafast Dynamics System. Examples of the table schematics is shown on the pictures:

Ultrafast Dynamics System includes:
Teahupoo Rider High
Repetition Rate Amplified Ti:Sapphire Laser
Beacon
Up-Conversion Spectrometer
Hatteras
Transient Absorption Spectrometer
Femtosecond Harmonics Generator

Teahupoo Rider and other options for Amplified
Ti:Sapphire Laser
1. We offer integrated oscillator/amplifier system
Teahupoo Rider.
Teahupoo Rider is a fully-integrated all-in-one-box system that includes
Trestles Finesse
oscillator or
Buccaneer SHG diode-pumped fiber oscillator, pulse stretcher, regenerative
amplifier pumped by multi
kHz Nd:YAG pump laser and pulse compressor. Teahupoo Rider has a factory
preinstalled repetition rate of 2, 5 or 10kHz and ideal for low cost femtosecond
micromachining systems, OPA pumping, ultrafast spectroscopy and variety of
applications in life sciences.
One-box system Trestles Finesse that include Trestles mini Ti:Sapphire oscillator and built in DPSS pump laser
When choosing specific Trestles Finesse model please indicate required CW pump power (4W or 6W), Ti:Sapphire pulse duration and required tuning range (or tuning range, where you want to achieve maximum performance)
Tuning range can be customized at the factory by choosing one of standard or custom made optics set. Typical tuning curves for 4W CW pump laser for two standard optics sets are shown in the Trestles Finesse brochure. For example, with 4W CW pump laser and long-wave mirrors set tuning range can be extended up to 940nm. With 6W CW pump laser tuning range can be extended up to 980nm.
2. If you already have a Ti:Sapphire oscillator, we can offer you stand alone Ti:Sapphire amplifier. Two standard models are available: Wedge M multipass or Wedge R regenerative.

Each amplifier is customized to the customer's amplifier pump laser.
2. Custom Teahupoo
Rider systems with a pump laser of your choice are also available. Depending
on the required specifications we can recommend a pump laser and make required
adjustments for optimum performance.
The following specifications can be achieved:
Repetition rate: single pulses, 10 Hz up to 10kHz
Pulse duration: 100fs, 50fs, 30fs, <30fs
Pulse energy: from 100 mJ per pulse to few mJ per
pulse
Tunability: both fixed wavelength and tunable options are available - please
indicate required tuning range.
To request additional information
E-mail to femto@sciner.com
| Del Mar Ventures 4119 Twilight Ridge San Diego, CA 92130 tel: (858) 876-3133 fax: (858) 630-2376 femto@sciner.com |
![]() |