Femtosecond Micromachining Workstation based on Mavericks Cr:Forsterite laser
Amplified femtosecond Cr:Forsterite Laser System
Mavericks CrF-65P
Femtosecond Cr:Forsterite laser with electronic starter and fiber laser pump
1250nm, 40-80fs, 100MHz, 2nJ
Femtosecond Cr:Forsterite regenerative amplifier with Nd:YAG pump laser,
stretcher (Model ASF-40), compressor (Model ACF-40), pulse picker (Model
OG12-2/1), synchronization electronics and cover box
Pump Laser 1060nm, 30ns, 30mJ, 10Hz
1250nm, 200ps,
10Hz, 0.5mJ
Sturdy welded steel frame with roller casters/leveling feet to aid in moving the system and leveling it once in its final position. Welded laser/beam delivery support frame for fixed beam overhead beam positioning.
Includes beam expanding telescope, beam delivery optics, laser focusing objective in extender tube with gas assist cutting head, manual Z-axis 25mm travel for focusing the laser will be accomplished by 1 vertical fine focus range in the laser optics.
Through the lens viewing to see exactly where and what you are cutting. A CCD camera & monitor with fiber optic ring illumination provides for a high quality picture of the worksite. An electronic crosshair generator is used to mark the laser position for targeting.
12 x 12 (300 x 300mm) travel. Stage includes pre-loaded ball screw type leadscrews, end & home limit switches, linear optical encoders, motor drivers, controller, interconnect module, cables and software. This is a high quality stage and will be operated in a closed loop fashion, thus using the linear encoders for true position feedback. The software is user friendly and easy to manipulate. Software includes all the typical commands such as linear and circular interpolation, speed and acceleration control, batch file processing, absolute and relative movement and many other features.
CDRH Class I. Fully enclosed worksite. . Interlocked access doors to worksite for easy load/unload of material. Without this item the unit will operate as a class IV laser.
The system described above is one of the configuration of fsMMWS (Femtosecond Micromachining Workstation) that we offer. To receive a quote or to discuss your requirements contact us at the address below (e-mail contact is preferred).
RELATED PRODUCTS
Del Mar Photonics product brochures
Femtosecond Lasers - Reserve a spot in our femtosecond Ti:Sapphire training workshop during this summer in San Diego, California
Trestles
femtosecond Ti:Sapphire laser
Trestles Finesse
femtosecond Ti:Sapphire laser with integrated
DPSS pump laser
Teahupoo Rider
femtosecond amplified Ti:Sapphire laser
Mavericks
femtosecond Cr:Forsterite laser
Tamarack
femtosecond fiber laser (Er-doped fiber)
Buccaneer
femtosecond OA fiber laser (Er-doped fiber) and SHG
Cannon Ultra-broadband
light source
Tourmaline femtosecond Yt-doped
fiber laser
High Power Femtosecond Laser Systems - Reserve a spot in our femtosecond Ti:Sapphire training workshop during this summer in San Diego, California
Cortes
800 tabletop 40 TW Ti:Sapphire laser system
Cortes E
- High vacuum laser ablation/deposition system with 2 TW Ti:Sapphire laser
Cortes K
- femtosecond seed laser for Petawatt KrF excimer laser
Cortes O 200TW femtosecond
laser - KD*P CPOPA based amplifier system
Jaws
femtosecond Cr:forsterite Multi-Terawatt Amplified Laser
High-vacuum system
for laser ablation/deposition
Femtosecond pulse measurement instrumentation - Reserve a spot in our femtosecond Ti:Sapphire training workshop during this summer in San Diego, California
Reef
scanning and single shot femtosecond autocorrelators
Avoca SPIDER
- Spectral phase interferometry for direct electric-field reconstruction
(SPIDER)
Rincon
third order femtosecond cross-correlator (third order autocorrelator TOAC) also
referred to as contrastmeter
Ultrafast Dynamics Research Tools - Reserve a spot in our Ultrafast Dynamics Tools training workshop during this summer in San Diego, California
Beacon
femtosecond fluorescence up-conversion (optical gating) spectrometer
Hatteras
Ultrafast Transient Absorption Spectrometer
Femtosecond Systems and Accessories - Reserve a spot in our femtosecond Ti:Sapphire training workshop during this summer in San Diego, California
Femtosecond
Micromachining
Femtosecond
nanophotonics
Femtosecond NSOM
Pacifica femtosecond
fiber laser based terahertz spectrometer
Pismo pulse
picker (ultrafast electro-optical shutter)
Wavelength conversion: second and third harmonics generators for femtosecond
lasers
Jibe white light
continuum generator
Kirra
Optical Faraday Rotators and Isolators
Laser accessories
Diffractive Variable Attenuator
for high power lasers
Deformable mirrors - active elements for adaptive optics systems -
Reserve a spot in our
Adaptive optics
and wavefront sensors workshop in San Diego
ShaH -
the family of fast, accurate and reliable wavefront sensors
Complete adaptive
optics systems
Faraday rotators and
isolators for high-power (up to 1kW) laser beams
SAM - Saturable Absorber
Mirrors
PCA - Photoconductive
antenna for terahertz applications
Passive Q-switches
based on Co2+:ZnS, Cr2+:ZnS and Cr2+:ZnSe
Lithium Niobate
Q-switches
Lithium Tantalate
Q-switches
Lasers, misc.
Grommet Diode Pumped Nd:LSB microchip solid-state lasers
Chatarra
Cr:ZnSe CW laser
Compact pulsed Nd:YAG lasers
OPO systems
Solid State Raman
Shifter
High aperture double
additive/subtractive monochromator
High repetition rate DPSS
lasers
Deep Sea
excimer lasers
Precision Optical Components, Crystals and Wafers
Optics from A to Z
Axicons -
buy online
BaF2 (Barium
Fluoride) components - buy online
BBO (Beta Barium Borate)
crystals - buy online
Ge (Germanium) optical
components - buy online
YAG:RE crystals and
laser rods
LiF (Lithium Fluoride)
optical components
Lithium Niobate wafers -
high quality non-linear optical substrate:
Diam 2", 1 mm thick -
diam 2", 500 micron thick - buy
online
Rutile (TiO2) coupling
prisms - buy online
Del Mar Ventures > Products > Femtosecond Products>
Femtosecond Literature>
Femtosecond Phenomena and Techniques>
![]() |
|
![]() |